PRODUCTION

Reinforcing armature brand B500B, B500NC, K500C-T, A500HW

Manufacture of products from rebar according to the standards: Latvia, Sweden,

Finland, Norway.

Reinforcing strands according to European standards.

BS 5896-1980, prEN 10138-3-2006, certified according to GlobCert

BS 5896-1980, prEN 10138-3-2006 ,ГОСТ 13840-68

СТО 71915393-ТУ 100-2011

Purpose:

Used as prestressing reinforcement prestressed concrete structures.

Stabilized reinforcing strands have a number of advantages over those manufactured using

the technology with tempering: an increase in the yield strength and temporary resistance

to rupture by 10-15%; increase the elastic limit by 25-30%; reduction of stress losses during

relaxation by 5-8%; increase the reliability and durability of the design.

It is possible to manufacture ropes from both round wires and a periodic profile wires.

Wire rod construction:

1х7

Specifications

Diametr,mm	Временное сопротивление разрыву, Н/мм²	Номинальная площадь сечения всех проволок каната, мм²	Масса 1 м длины каната, г/м	Минимальное разрывное усилие, кН	Минимальное относительное удлинение перед разрывом, %
9,3	1770	52	406	92	3,5
9,3	1860	52	406	97
9,6	1860	55	430	102
12,5	1770	93	726	165
12,5	1860	93	726	173
(12,7)	1860	112	875	208
12,9	1860	100	781	186
15,2	1670	139	1086	232
15,2	1770	139	1086	246
(15,2)	1860	165	1289	307
15,7	1770	150	1172	266
15,7	1860	150	1172	279
(18,0)	1700	223	1742	379
18,0	1770	200	1562	354

Low carbon wire for mesh

The wire is intended for the manufacture of nets, produced the following types:

Polymer-coated wire